Products
labscienceswebsite1106finalversion2009update001021.gif
labscienceswebsite1106finalversion2009update001020.gif
labscienceswebsite1106finalversion2009update001019.gif
labscienceswebsite1106finalversion2009update001018.gif
bus19_blur.jpg
labscienceswebsite1106finalversion2009update001017.gif
labscienceswebsite1106finalversion2009update001016.jpg
LabSciences, Inc.
labscienceswebsite1106finalversion2009update039018.jpg

labscienceswebsite1106finalversion2009update039017.gif
labscienceswebsite1106finalversion2009update039016.gif
Pipette Stand - Vertical
labscienceswebsite1106finalversion2009update039015.jpg
labscienceswebsite1106finalversion2009update039014.jpg
Manufactured from polypropylene with a heavy
9" diameter base and a threaded 15" long square
rod that screws into the base.

The top disc that attaches to the rod has holes for
holding pipettes.

The lower disc has pilot holes for inserting the pipettes and allows liquids to drain down to the base.

The discs are adjustable to accomodate different
length pipettes.

Alignment arrows are inscribed on the discs to facilitate
centering the holes.




























labscienceswebsite1106finalversion2009update039013.jpg
labscienceswebsite1106finalversion2009update039012.jpg
labscienceswebsite1106finalversion2009update039011.gif
labscienceswebsite1106finalversion2009update039010.gif
labscienceswebsite1106finalversion2009update039009.gif
Cat. No.               Description                                                                Pack
PSV-28             Vertical Pipette Stand holds 28 Pipettes with a               1/Pk
                          maximum diameter of 9/16".







Pipette Stand - Rotary
labscienceswebsite1106finalversion2009update039008.jpg
labscienceswebsite1106finalversion2009update039007.jpg
Manufactured from polypropylene and designed to
rotate around a 19" central vertical axis for easy pipette selection.

The top disc has a grid pattern that is concentric with the
bottom disc to hold the pipettes in a vertical position.

The lower rotating disc is 9" in diameter and has four concentric rings for inserting the pipette tips to allow liquids to drain.

Liquids draining from the pipettes are retained on top
of the stationary base by an outer ring.

The pipette stand can be easily assembled and
disassembled.




























labscienceswebsite1106finalversion2009update039006.gif
labscienceswebsite1106finalversion2009update039005.gif
labscienceswebsite1106finalversion2009update039004.gif
labscienceswebsite1106finalversion2009update039003.gif
labscienceswebsite1106finalversion2009update039002.gif
Cat. No.                Description                                                             Pack
PSR-28               Rotary Pipette Stand holds 94 Pipettes                        1/Pk








Home
Bottle Top Dispenser
Fully Autoclavable M/C Pipette
New Products
About Us
< Micro Test Plate/Petri Dishes - Previous Page - Stoppers/Slide Storage Box - Next Page >
- Analyzer Cups
- Bottle Top Dispenser
- Centrifuge Tubes
- Culture Tubes & Caps
- Cuvettes
- Cryogenic Vials
- Dilution/Hematology Vials
- Dissolution Filters
- Fibrin Cups & Tips
- Filter Tips
- Glassware
- Histology Cassettes
- Labware
- Pipettes/Pipettors
Pipet Tips  
- Plasticware
- Sample Cups
- Scintillation Vials
- Specimen Containers
- Test Tubes & Caps
- Transfer Pipets
-Transport Tubes/Vials
- Weighing Dishes
Clamps
Crucibles/Tongs
Laboratory Jack
Micro Centrifuge Tube Rack
Microscope Slides
Micro-Test Plate
Petri Dishes
Pipette Stands
Rubber Stoppers
Slide Storage Boxes
Spatulas
Stirring Rods - Glass
Support Stands with Rods
Support Stands with Rings
Test Tube Racks
Water Bath
Watch Glass
Wire Gauze
"Labware Contents"
Ordering
Contact Us
Catalog
labscienceswebsite1106finalversion2009update039001.jpg
 Product Index